Sunday, September 30, 2012

Ritchey BreakAway TI Cross Review


I had no less than 6 different people stop me at yesterdays cross race to check out my Ritchey BreakAway TI Cross bike.  After several iterations, I finally got my Ritchey BreakAway TI Cross frame built up the way it should have been in the first place and I thought it was time to post a thorough review.  Anybody who knows me, knows I am a Titanium freak and I love cyclocross.  So when I considered getting a travel bike to take with me when I fly, I knew I was getting a Ritchey BreakAway from my team sponsor Ritchey and I knew it was going to be the TI Cross model.  

I have had this bike for a few years now and have put quite a few miles on it.  It has flown to Rapid City, SD and St. Louis, MO several times with no issues or oversize baggage charges.  Tom Ritchey really outdid himself with the BreakAway design.  It is so simple that it is genius.  The seatpost is the connecting rod for the first joint and a special fitting with flared ends is joined by a clamp on the downtube for the second split in the frame.  You can check out the Ritchey site for a more detailed explanation and a great video of how to pack/unpack and assemble the bike.  The frame just has that classic look and appeal that I would expect from Ritchey.  With my build kit of Campagnolo Record 10-speed, custom carbon tubular CX wheels, Crank Brothers 3TI Eggbeaters and a full complement of Ritchey WCS componentry;  the bike came in at 16 pounds.  

I was very skeptical about how much rigidity the frame would have, given that it splits into 2 halves.  I knew from the first time I rode it, that I was wrong.  I did not notice any flexing around the BB area when climbing out of the saddle or any twist when putting it through a technical CX course.  I wasn’t really surprised at how smooth it was, but the lack of flex was a huge shock.  So, this bike is comfortable, yet stiff and splits in two so you can take it with you in your travels.  The rear triangle has rack mounts, so you could easily set it up for touring or add some fenders. What more could you ask for?  I am not sure; as my only complaint is that they do not offer a hard travel case for it yet.  The soft case is still going strong, but I am always nervous when I fly with it.  The baggage handlers aren’t known for their respect of passenger luggage. I have been waiting for Ritchey to release a hard case, but I may just end up buying an S&S hard case before I travel next time. 

Some of you might ask if this could be your “A” race bike.  I am here to tell you that I have raced the bike in some local cyclocross races and it rocks!  The bike handles awesome.  It has never once gotten sketchy on me; whether the course was rough, soft, muddy or even when misjudging a corner.  There is plenty of mud clearance, as well.  With a race weight of 16 pounds, it is easy to shoulder up the most demanding run-ups.  I have never had to tighten any of the fittings after any race.  The list of benefits just goes on and on.  Wow, I am impressed. 

Not only does Ritchey produce some of the best components on the market, they also make an unbelievable cyclocross bike that just happens to double as an airline size travel bike!

4 comments:

  1. Thanks for the review. When packing, is it necessary to remove the cranks? And do you find that the extra width of cantis makes packing more of a challenge as you layer in the parts?

    ReplyDelete
  2. Pete,

    I normally only remove the pedals and handle bar from the stem. No issues with the cantis, but the thing only seems to go in the bag one way. I will try to get a pic of it all packed up and posted.

    ReplyDelete
  3. I own the road steel version since 6 years and we're still in love, every day. I'm thinking of getting the ti cross version - how would you think a disc up front and carbon wheels would work, on- and off - road?

    ReplyDelete
  4. Henrik,
    Sorry this reply is years behind, but until recently, you would be hard pressed to find a viable 1 1/8" steerer tubed disc fork. Ritchey came out with one this year and i think that would be a great option on this frame setup. I converted a couple of pairs of my carbon cross tubulars to disc hubs and they work great on my disc brake cross bike. I even have a 20 hole front disc brake hub on one with no issues, although I think 20 holes is pushing it for a disc brake wheel.

    ReplyDelete